Pounds-force per square inch to Kilopascals – pound-force per square inch to kilopascal Converter
1 psi = 6.894757293168 kPa
Formula
kPa = psi × 6.894757293168
Pounds-force per square inch to kilopascals conversion table
| pounds-force per square inch (psi) | kilopascals (kPa) |
|---|---|
| 0.25 psi | 1.72369 kPa |
| 0.5 psi | 3.44738 kPa |
| 1 psi | 6.894757293168 kPa |
| 2 psi | 13.7895 kPa |
| 5 psi | 34.4738 kPa |
| 10 psi | 68.9476 kPa |
| 20 psi | 137.895 kPa |
| 50 psi | 344.738 kPa |
| 100 psi | 689.476 kPa |
| 200 psi | 1378.95 kPa |
| 500 psi | 3447.38 kPa |
| 1000 psi | 6894.76 kPa |
| 2500 psi | 17236.9 kPa |
| 5000 psi | 34473.8 kPa |
| 10000 psi | 68947.6 kPa |
Pounds-force per square inch and kilopascals are both pressure units. One pound-force per square inch equals 6.894757293168 kilopascals; enter any value above for an instant result, or use the table for common conversions.
Sanity-check examples
1 psi = 6.89476 kPa10 psi = 68.9476 kPa2.5 psi = 17.2369 kPa
Common pitfalls and look-alike units
One standard atmosphere is exactly 101325 Pa while 1 bar is 100000 Pa — about 1.3% apart, so do not mix them. Tire pressures are often quoted in psi or bar (1 bar ≈ 14.5 psi, 1 psi ≈ 6.895 kPa); millimeter of mercury uses the conventional value 1 mmHg = 133.322387415 Pa.
Frequently asked questions
How many kilopascals are in a pound-force per square inch?
1 pound-force per square inch (psi) equals 6.894757293168 kilopascal (kPa).
How do I convert pounds-force per square inch to kilopascals?
Multiply the pound-force per square inch value by 6.894757293168 to get kilopascal — for example, 2 pounds-force per square inch = 13.7895 kilopascal.
How do I convert kilopascals back to pounds-force per square inch?
1 kilopascal is approximately 0.145038 pound-force per square inch. Use the swap button or the reverse conversion page linked on this page.